1900 Series. Three Flute Downcut Finishing Spiral
Finishing tools are used when an extremeley smooth edge cut is required. The three flute design provides a better finish than the two flute at the same feed rate. Three flute tools are used for cutting natural woods and man-made wood composites. Some users experience greater tool life compared to two flute tools. L = left hand rotation. * Not guaranteed against breakage due to extreme cutting edge length.
Starting At: £43.54
SKU: 1900series
Categories: Downcut, Finishing, Three Flute, Vortex, Vortex Downcut, Wood/Composite Wood
Tags: downcut, vortex, wood
Finishing tools are used when an extremeley smooth edge cut is required. The three flute design provides a better finish than the two flute at the same feed rate. Three flute tools are used for cutting natural woods and man-made wood composites. Some users experience greater tool life compared to two flute tools. L = left hand rotation. * Not guaranteed against breakage due to extreme cutting edge length.
Product Name | CED | CEL | SHANK ⌀ | OAL | Price ex VAT | Buy |
---|---|---|---|---|---|---|
1985L* | 3/4" | 3-1/2" | 3/4" | 6" | £404.27 |
|
1985* | 3/4" | 3-1/2" | 3/4" | 6" | £327.74 |
|
1982 | 3/4" | 1-5/8" | 3/4" | 4" | £209.86 |
|
1980L | 3/4" | 2-1/2" | 3/4" | 5" | £279.00 |
|
1980 | 3/4" | 2-1/2" | 3/4" | 5" | £226.24 |
|
1970L | 5/8" | 2-1/8" | 5/8" | 4" | £212.43 |
|
1970 | 5/8" | 2-1/8" | 5/8" | 4" | £183.63 |
|
1965 | 1/2" | 2-1/8" | 1/2" | 4" | £119.71 |
|
1960L | 1/2" | 1-3/4" | 1/2" | 3-1/2" | £130.83 |
|
1960 | 1/2" | 1-3/4" | 1/2" | 3-1/2" | £106.09 |
|
1950L | 1/2" | 1-1/4" | 1/2" | 3" | £124.03 |
|
1950 | 1/2" | 1-1/4" | 1/2" | 3" | £100.51 |
|
1940L | 3/8" | 1-1/4" | 3/8" | 3" | £69.05 |
|
1940 | 3/8" | 1-1/4" | 3/8" | 3" | £60.83 |
|
1930L | 1/4" | 3/4" | 1/4" | 2-1/2" | £43.54 |
|
1930 | 1/4" | 3/4" | 1/4" | 2-1/2" | £44.39 |
|
Additional information
Product Name | 1930, 1930L, 1940, 1940L, 1950, 1950L, 1960, 1960L, 1965, 1970, 1970L, 1980, 1980L, 1982, 1985*, 1985L* |
---|---|
CED | 1/4", 3/8", 1/2", 5/8", 3/4" |
CEL | 3/4", 1-1/4", 1-3/4", 2-1/8", 2-1/2", 1-5/8", 3-1/2" |
OAL | 2-1/2", 3", 3-1/2", 4", 5", 6" |
Shank Dia | 1/4", 3/8", 1/2", 5/8", 3/4" |
SKU | 1930, 1930L, 1940, 1940L, 1950, 1950L, 1960, 1960L, 1965, 1970, 1970L, 1980, 1980L, 1982, 1985*, 1985L* |