4200 Series. Two Flute Low Helix Upcut Finishing Spiral router bit

Our double-edge low helix spirals are recommended for cutting hard plastics, such as acrylic and phenolic. The lower helix angle produces less “lifting” and “fluttering” on the plastic material. Tools are extremely sharp, producing very clean edges on plastic materials requiring little secondary work. These bits also provide great finishes in hardwoods. L = left hand rotation.

 

Starting At: 35.91

Our double-edge low helix spirals are recommended for cutting hard plastics, such as acrylic and phenolic. The lower helix angle produces less "lifting" and "fluttering" on the plastic material. Tools are extremely sharp, producing very clean edges on plastic materials requiring little secondary work. These bits also provide great finishes in hardwoods. L = left hand rotation.
Product name sku Ced Cel Oal Shank dia Price Buy
4208 6mm 20mm 64mm 6mm 39.60 exc. VAT

4280 3/4" 2-1/2" 5" 3/4" 216.98 exc. VAT

4260L 1/2" 1-3/4" 4" 1/2" 120.81 exc. VAT

4260 1/2" 1-3/4" 4" 1/2" 94.41 exc. VAT

4250 1/2" 1-1/4" 3-1/2" 1/2" 81.41 exc. VAT

4245 1/2" 1" 3" 1/2" 78.81 exc. VAT

4240 3/8" 1" 3" 3/8" 54.38 exc. VAT

4235 5/16" 1" 3" 5/16" 54.23 exc. VAT

4233 1/4" 3/4" 3" 1/4" 40.12 exc. VAT

4230L 1/4" 3/8" 3" 1/4" 47.79 exc. VAT

4230 1/4" 3/8" 3" 1/4" 35.91 exc. VAT

4220 3/16" 5/8" 2-1/2" 1/4" 44.30 exc. VAT

4253 12mm 35mm 88mm 12mm 76.69 exc. VAT

4246 10mm 30mm 76mm 10mm 63.03 exc. VAT

Additional information

Product Name/SKU

4208, 4246, 4253, 4220, 4230, 4230L, 4233, 4235, 4240, 4245, 4250, 4260, 4260L, 4280

CED

6mm, 10mm, 12mm, 3/16", 1/4", 5/16", 3/8", 1/2", 3/4"

CEL

20mm, 25mm, 30mm, 35mm, 3/8", 3/4", 1", 5/8", 1-1/4", 1-3/4", 2-1/2"

OAL

64mm, 76mm, 88mm, 2-1/2", 3", 3-1/2", 4", 5"

Shank Dia

6mm, 10mm, 12mm, 1/4", 5/16", 3/8", 1/2", 3/4"

Select your currency
EUR Euro
G-2SVVPCHNSH